A Multitasking Blog

Install or Flash official Firmware or Stock Rom on Swipe Konnect Star (Install new android Operating System)

This post shows how to flash or Install official firmware/ stock or custom ROM on Swipe Konnect Star using SP Flash tool. Swipe Konnect Star smartphone have android 6.0 marshmallow on MediaTek MT6735 Processor.

Points to remember

1) This is a general method which works on almost every MediaTek devices. 
2) Mentioned firmware is only for "Swipe konnect Star" model, don't try it on other devices otherwise, your smartphone will stop functioning. 
3) Before flashing your smartphone backup, your data as flashing erases data from your phone which is not recoverable. 
4) Your smartphone should be at least 40-50 % charged to perform this flashing tool. 
5) Follow steps carefully otherwise it can stop functioning. 
6) For any boot loop, damage we are not responsible. 

Required tools & Files

1) SP Flash Tool Download
2) Firmware        Download
3) V-com Driver  Download

Follow these Steps to flash 

Step 1: Download firmware package for Swipe Konnect Star and extract it, the package includes SP Flash tool, Driver and Firmware file. You can also download these tools separately from the download link given.

Step 2: Download and Extract USB or VCOM driver. To install USB driver.

1) Right Click on My Computer, then go to the "properties" option --->then go to "Device Manager" option

2) Click on "Action", then click "legacy Hardware", then click "Next", then choose "Install the hardware that I manually select from list(Advance)", then click "Next" option, then select "Show all devices", then click "Next", then click "Hard Drive

3)Now click on "Browse", then  Select "Android_Gadget_CDC_driver.inf" from "Android CDC Driver folder", then click "Ok", then click "Next", then click "Next", then click "Finish".

4) USB driver will be successfully installed.

Step 3: Download and Extract SP Flash zip file, we will see files like this. Click on the flash_tool.exe file. It will launch the flash tool.

Step 4: After SP Flash tool is launched, Click on the download tab 

Step 5: Now In download tab--> click "choose" to select Scatter-loading-file appearing on the right side of the flashing tool. 

Step 6: Now, Browse to select "MT6735M_Android_scatter" file under "firmware" folder from the downloaded stock ROM folder. 

Step 7: After the "Android Scatter" file is loaded, select all the items in the list and click the download button to start flashing.

Step 8: Now, switch off the phone and connect the mobile with the computer through USB cable without the battery(in case the battery is removable). Press volume up or volume down button so that computer can able to detect smartphone It will look like this once flashing process is started. 

Step 9: Now, wait for a few minutes till the flashing process gets completed after the flashing process is finished it will show the right arrow tick.

Step 10: Close flashing tool and disconnect your smartphone from the computer and restart your mobile.

Congratulations, now your mobile phone is updated with the new ROM.

No comments:

Post a Comment

Side Bar Add

Search This Blog

Facebook Page

Blog Adda